

The ZBSA 19, or ZB/SA 19, was the first standard telephone of the German Reichs-Telegraphen-Verwaltung, the German telephone authority of the time. The ZBSA 19 was manufactured exclusively by Siemens & Halske. It was the successor to the ZBSA 11 and was clearly based on that model. With the increasing automation of telephone networks in mind, it was designed for mass production. The German telephone authority was certainly not the only user. The telephone was also used in private installations and on public telephone networks outside Germany. For example, the device was used in Amsterdam, where the telephone network was automated in the early 1920s. See also this blog post on the subject.
Technical characteristics

The ZBSA 19 was the first telephone to use a round rotary dial, specifically the M21b type. Its predecessor, the ZBSA 11, still used a so-called “Schlagring” (knuckleduster-shaped) dial. Later examples of the ZBSA 19 were equipped with the successor N24 rotary dial.
ZB/SA stands for Zentralbatterie-Betrieb / Selbst-Anschluss (central battery operation / self-dialling). The telephone is sometimes referred to as W19, but this designation is not correct. The phone did not have a generally accepted nickname. This model was produced only in black. The ZBSA 19 was based on the ZBSA 11, and in turn the ZBSA 19 formed the basis for its successor, the ZBSA 24. There was also a wall-mounted version of this telephone, which carried the same designation.
Construction and design

The ZBSA 19 features an all-steel sheet-metal housing, with external bells and striker mounted at the rear. That housing can be opened easily without tools by operating a small switch on the underside and then turning the cradle a quarter turn counter-clockwise and removing it. The housing cover can then be hinged forward.

Inside, all components are mounted on the base plate, including the rotary dial. These components are interconnected by means of a wiring harness with solid-core wires. The cords were already fitted with crimped cable lugs, rather than handmade wire loops. The ZBSA 19 has a high cradle, because the original handset was fitted with a funnel-shaped mouthpiece. Later versions were equipped with a pepper-pot style transmitter.
In my collection

Over time, I have collected several examples of the ZBSA 19, in varying states of originality. In most cases, the handset has been replaced with one without a funnel mouthpiece. Often, the rotary dial is from a manufacturer other than Siemens & Halske. It is likely that the telephone was originally supplied without a rotary dial, fitted with a blanking plate, and later upgraded to automatic service using a dial from another manufacturer. It is also possible that these changes were the result of repairs. One example has also had its internal wiring modified with more modern cabling. In addition, I managed to acquire a very nice example of the wall-mounted version of this telephone.

Leave a Reply