Siemens & Halske VSa tist 67 L

[:nl]Nog een vroege versie van het Modell 27 / W28. Heeft veel overeenkomsten met de zogenaamde “Modell 26”. Ik kan ook maar één echt verschil vinden: de sleuven rond de bellen zijn bij deze niet aangebracht.

Deze versie heeft ook weer dezelfde metalen beneden- en boven-behuizing met het S&H-logo op de achterkant. De kiesschijf is een V.sa sch 90 a met een emaille cijferring en vernikkelde messing vingerwiel. Let ook op de cirkels rond de cijfers.

VSa tist 67 L binnen
VSa tist 67 L binnen

As mentioned, there are no vertical slots near in the lower housing. The partition between the bells and electronic components is straight and not bent.

Inside the extra terminal W2, near the rear, close to the cord retaining bracket, is omited. And the bracket is of the small type.

VSa tist 67 L bodem
VSa tist 67 L bodem

The base plate has the orange/red lettering, typical of Siemens products, with the letter L for the production year 1930.

VSa tist 67 L schroef
VSa tist 67 L schroef

But the most interesting feature, I think, of this particular specimen, is the round bolt on the handset rest. The far majority of have a hexagonal bolt.
Unfortunately I there was an ill fitting replacement bolt when I got this telephone.

I replaced it with an newer one that was on a Siemens magneto phone from the 1950s. The original one was brass, painted black, as can be seen on my Modell 26.

VSa tist 67 L diagram
VSa tist 67 L diagram

And of course there is a diagram on the bottom of the base plate, reading Vsa Ms 54S65.[:en]

VSa tist 67 L
VSa tist 67 L

VSa tist 67 L achter
VSa tist 67 L achter

Another early version of the Modell 27 / W28. It has a lot of features in common with the “Modell 26”. In fact I can only find one reall difference: the slots are omited.

This version has the same metal upper and lower housing, with the S&H logo on the back. The dial is a V.sa sch 90 a with enamel (porcelain) number ring and nickel plated brass finger wheel. Please note the circles around the numbers.

VSa tist 67 L binnen
VSa tist 67 L binnen

As mentioned, there are no vertical slots near in the lower housing. The partition between the bells and electronic components is straight and not bent.

Inside the extra terminal W2, near the rear, close to the cord retaining bracket, is omited. And the bracket is of the small type.

VSa tist 67 L bodem
VSa tist 67 L bodem

The base plate has the orange/red lettering, typical of Siemens products, with the letter L for the production year 1930.

VSa tist 67 L schroef
VSa tist 67 L schroef

But the most interesting feature, I think, of this particular specimen, is the round bolt on the handset rest. The far majority of have a hexagonal bolt.
Unfortunately I there was an ill fitting replacement bolt when I got this telephone.

I replaced it with an newer one that was on a Siemens magneto phone from the 1950s. The original one was brass, painted black, as can be seen on my Modell 26.

 

VSa tist 67 L diagram
VSa tist 67 L diagram

And of course there is a diagram on the bottom of the base plate, reading Vsa Ms 54S65.[:]